The secret to pool deck cleaning for pavers is using the right method, not the most pressure. In Compton, CA, we match the cleaner and pressure to the surface so it comes out clean without damage. On pavers, the method we use is pressure wash with a surface cleaner.
Method and pressure
Cleaning solution: A paver cleaner or pre-treatment; efflorescence needs a dedicated cleaner.
Caring for pavers
Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them. Re-sanding the joints, often with polymeric sand, and sealing afterward keeps weeds and ants out and holds the pavers in place.
Avoid: A narrow tip aimed into the joints, which blows out sand and can loosen pavers.
How often: Clean every 1-2 years; reseal every 2-4 years.
Is it time for pool deck cleaning for pavers?
- Slippery spots near the water
- Black or green growth at the edges and in joints
- Rust or leaf stains
- Faded or dirty coating
- Hard-water and chlorine residue
What causes the dirt and stains
- Constant splashing and standing water
- Sunscreen, body oils and pool chemicals
- Leaves and pool toys left on the deck
- Hard water drying on the surface
What you can do yourself
- Hose off the deck after heavy pool use
- Remove leaves and toys before they stain
- Keep chlorine and acid containers off the deck surface
- Ask us before using any cleaner on a coated or stone deck
Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.
Common mistakes to avoid
- Peeling or etching a coated 'cool deck' surface with high pressure
- Chemicals and wash water getting into the pool
- Pitting travertine with acid cleaners
- Slips on wet, treated surfaces
What happens on the day
- Check the deck material and coating
- Protect the pool and nearby plants
- Pre-treat algae and stains with pool-safe methods
- Clean with pressure suited to the surface
- Rinse thoroughly away from the water
Many pool decks have a textured acrylic or 'cool deck' coating. These need lower pressure than bare concrete, and a deck that is peeling may need recoating rather than more cleaning.
How much does pool deck cleaning for pavers cost?
What moves the price:
- Size: square footage of siding, roof or flatwork
- Condition: heavy growth, old stains and peeling finishes take longer
- Access: number of stories, roof pitch, slopes and how close we can park
- Add-ons: sealing, gutter brightening and other services done in the same trip
These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.
Other services for pavers
- Pressure Washing for Pavers
- Driveway Cleaning for Pavers
- Sidewalk & Walkway Cleaning for Pavers
- Patio Cleaning for Pavers
- Paver Cleaning & Sealing for Pavers
- Rust Stain Removal for Pavers
- Oil Stain Removal for Pavers
- Gum Removal for Pavers
- Efflorescence Removal for Pavers
Pool Deck Cleaning for Pavers in Compton, CA
Driveways and patios in California collect oil, dust and tire marks over the long dry season. Cleaning with a surface cleaner and controlling the wash water keeps it out of storm drains.
Some cities in California limit outdoor water use, including washing hard surfaces with a hose, especially during drought declarations. Pressure washers use far less water than an open garden hose, but rules vary, so it's worth checking your city's current restrictions. Wash water should also be kept out of storm drains.
Crews serve all of Compton (ZIP codes 90220, 90221, 90222, 90223 and 90224), plus East Rancho Dominguez (1.4 mi), Lynwood (2.4 mi), Willowbrook (2.5 mi) and West Rancho Dominguez (2.9 mi). Call (555) 010-0000 for a free quote in Compton.
Pool Deck Cleaning for Pavers: frequently asked questions
How much does pool deck cleaning for pavers cost in Compton, CA?
Pool Deck Cleaning for Pavers typically costs $200-$500 for a typical residential pool deck, and usually takes 1-3 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.
Do you use high pressure for pool deck cleaning for pavers?
For pavers: usually 1,500-3,000 PSI with a surface cleaner, adjusted to keep joint sand in place where possible. What we avoid: a narrow tip aimed into the joints, which blows out sand and can loosen pavers. We keep the pressure even and controlled, with the right tools for the surface.
Is pool deck cleaning for pavers safe for my plants and pets?
We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.
How often should I schedule pool deck cleaning for pavers?
Clean every 1-2 years; reseal every 2-4 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.
What if it rains on the day?
Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.